We have also learned to take a step back and adjust job duties for those who have reached their capacity in a certain area. Industry is ever evolving and advancing, and we need to have the correct employees in place to ensure Chapter 2 stays at the forefront of manufacturing. Over the years, we have made some transitions in job duties and hired to fit the business needs. This does not mean that we need to fire someone or demote them — their competences are still an important asset to the company. However, it is important to recognize necessary change for the sake of the business.
Raymond Laser is a full laser machine manufacturer, with nearly 13 years of experience as an industry pioneer. Raymond Laser provide the excatly right solution for your industry’s marking and cleaning requirement. With Professional logistics and distribution, we can ship the machine to your local port in time base on FOB or CIF term, also can provide the door to door service. According to ergonomics and processing characteristics, the laser rust remover meets the requirement of space-saving displaying which applies to different processing environment. The cleaning effect can be judged by CCD camera and the surface acoustic wave caused by laser. The machine is capable of cleaning any metal, including carbon steel, stainless steel and coated steel.
I need to say that your machine is the best in such price segment.Thanks. We have it up and running now and so far everything is running smoothly. Everything looks great,it was nice doing business with your company.You were very helpful and very courteous,i would gladly do business with you again. 3, without any chemical cleaning fluid, no consumables, safety and environmental protection.
The damage brought by MOPA fiber laser cleaning is very small, and the roughness value is close or even lower than the original surface . While cleaned by CW lasers, the roughness value will be 1.5X more than the original surface. For pulsed fiber lasers, a laser with lower frequency is more likely to hurt the substrate during the cleaning process, and a laser with a narrow pulse width could clean the paint more easily. It’s essential to balance the heat between cleaning the paint and melting the substrate . A pulsed fiber laser with a master oscillator power amplifier structure offers the advantage of precise heat control, which is a critical point during the cleaning process.
Graph showing the history of maximum laser pulse intensity throughout the past 40 years. Simultaneously, at Columbia University, graduate student Gordon Gould was working on a doctoral thesis about the energy levels of excited thallium. When Gould and Townes met, they spoke of radiation emission, as a general subject; afterwards, in November 1957, Gould noted his ideas for a “laser”, including using an open resonator (later an essential laser-device component). Moreover, in 1958, Prokhorov independently proposed using an open resonator, the first published appearance of this idea. Meanwhile, Schawlow and Townes had decided on an open-resonator laser design – apparently unaware of Prokhorov’s publications and Gould’s unpublished laser work. In April 1957, Japanese engineer Jun-ichi Nishizawa proposed the concept of a “semiconductor optical maser” in a patent application.
Keeping up with time requirements won’t be a problem as our machines are fed by high-power laser cleaning systems of up to 500 watts. Total power quality solutions keeping production moving while protecting people, equipment and information. Dyson is back with a new vacuum cleaner, one that uses laser light to reveal the dust and debris you may otherwise have failed to notice while cleaning.
Parts used for building an equipment are high in guidelines and perceived by worldwide affirming bodies. 2) precise cleaning, can achieve a precise location, the exact size of the selective cleaning. I hope you are well,my laser is operating very nicely,i have had a lot of business and it has already paid itself.Now we have some brass need to be cut,pls guide us the better parameters.